Water Pipe Headphone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular headphone stand using ⌀ 15 mm water pipes.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 1
- Views
- 893
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had been looking for a good headphone stand for ages to buy or a ready made model to print. I could not find one that checked all boxes, so I designed one myself.
I have an ARCAM.rHEAD headphone amp and designed the stand to fit the amp and use is as the base.
I have included 2 other headphone stands if you don't want the amp underneath or if you have 2 large headphones. And also 2 extras, one cable holder and a holder for a smaller headphone on the back of the stand (see images).
I used a little drop of hot glue in the holes to the pipes don't slide, but are still removable.
I have included a “Test fit” model to check the fit of your water pipes.