E3D Hemera XS - Ender3 Adapter Plate

This is a plate for ender 3 with bltouch for hemera xs

the plate was remixed from: https://www.printables.com/prints/21817-ender-3-compact-hemera-mount-plate-with-bltouch

the fan duct was remixed from: https://www.thingiverse.com/thing:4674206

this is for 4020 fan and a revo nozzle

adxl mount optional

------

images are from older version i did not use (no hole and bltouch not high enough, everything else is the same)

update1:

after testing this, this model it have some issues that i might resolve later, for now this is good enough

• plate is not thick enough so i had to use some metal spacers for the bolts - TIGHTEN WITH GREAT CAUTION 
• cable hole need to be a bit bigger and move to the middle
• bltouch location is not ideal, need to move it to the left (although it works fine, just a bit funny for me :) )
• i like the cable hole solution as i can 90 degree them, and it give me more Z height

• i also added the blender file, be aware i am terrible at this so the model is not perfect, feel free to remix
• please use PETG or ABS

recommend slicer settings:

• 0.4 nozzle
• 4 Walls
• 5 Bottom
• 5 Top
• 40% infill
• Layer height 0.24

klipper settings i use

offsets:

• x_offset: 72.5
• y_offset: 0
• z_offset = 1.944 - PLEASE CALIBRATE THIS

calibrate below also, use this as reference

[stepper_x]

position_endstop: -22
position_min: -22
position_max: 234 

[stepper_y]

position_endstop: -22
position_min: -22
position_max: 225

[extruder]

microsteps: 16
rotation_distance: 7.82 # default, not good enough too much flow for me, still tuning

sensor_type: ATC Semitec 104NT-4-R025H42G