Spool Holder for IKEA PLATSA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spool holder designed to be mounted to IKEA PLATSA.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 101
- Makes
- 3
- Views
- 1,155
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Attention! Apparently there are two versions of PLATSA with a different hole spacing. Please measure the spacing first! There are two models, one with a spacing of 192x32mm and the other one with a spacing of 200x25mm. Print the matching base plate.
This is a spool holder designed to be mounted to IKEA PLATSA.
It uses a slightly modified version of the spool holder of a Voron 2.4 that has been attached to a base plate. The filament spool is only in contact with a piece of PTFE tube that you put into the holder piece. This greatly minimizes friction.
Both files can be printed in the standard orientation. You might need some support for the hexagonal holes in the base plate.
To build this, you'll need:
- 2 M4 nuts
- 2 M4x10mm screws
- 4 3.5x12mm countersunk wood screws
- 90mm PTFE tube
Instructions on how to build and mount the spool holder can be seen on the picture below as well as in the provided exploded_drawing.PDF
