1 / 3
Solder Fume Extractor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed to add Type C, Battery Holder, Larger fan Hole, Flush button hole
- Rating
- 4.833 / 5
- Likes
- 65
- Downloads
- 249
- Makes
- 9
- Views
- 2,098
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Solder Fume Extractor by StriK3FoRC3 adding a few modifications for myself as I don't like to solder direct to Batteries, and have connectors to easily swap parts out.
This my first time using CAD. I have included the FreeCAD file to allow more modifications.
Changes
- Swapping the Micro USB port to USB C
- Carving out the main battery holder section to allow a battery holder so not needing to solder to the battery
- Larger fan wire hole to allow a 4 pin fan connector to go through
- Flush push button
What you will need
- 12V 120x25mm 3000RPM Fan (Any 120mm Computer Fan)
- 1S 3.7v Battery Indicator https://www.aliexpress.com/item/1005001727427034.html
- MT3608 Step Up Module https://www.aliexpress.com/item/1005002225004697.html
- 18650 Battery Holder https://www.aliexpress.com/item/32842979487.html
- 18650 TP4056 USB C Lithium Battery Charger https://www.aliexpress.com/item/32930640893.html
- 12mm Latching Buttons https://www.aliexpress.com/item/32831175139.html
- 18650 Lithium Battery
- 4x M4 Screw (Cut to 16,5mm)
- 4x M4 Nut
- 4x M4 Washer (spacer For the Fan)
- Activated Carbon Air Filter https://www.aliexpress.com/item/4001305636978.html