Milwaukee M18 tool holder (circular saw)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Should have the required clearance for the circular saw.
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 414
- Makes
- 2
- Views
- 2,167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find one I liked so I decided to design my own.
I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a bit overkill but I have printed lots of these and never had one fail.
This should have enough clearance to fit the circ saw. It is a bit of a waste of filament in my opinion as the same result could be achieved by just mounting a block under the regular holder but in case you want them to all have the same look, here it is.
I put support blockers in the cavity to save a bit of filament. The finish was a bit ugly where it was bridging, but its hidden when mounted anyways.