Hotend Cable Vertical Support Coreception, Elf & SapphirePro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elevates hotend cable from the controller to a strain relief mounted on the linear rail carriage assembly. Two parts…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Elevates hotend cable from the controller to a strain relief mounted on the linear rail carriage assembly.
Two parts are mirror objects that are fastened together using No. 4 thread forming or M3 sheet metal screws.
The third printed part is a cable retaining top cover attached using No. 2 thread forming or M2 sheet metal screws. It resembles almost a one quarter (1/4) ring with an outside edge that follows the same radius as the two mirrored brackets.
Attach the bottom of the vertical support brackets using a M4 x 8mm long screws and M4 drop-in nuts to the 2020 extrusion.
Complement Coreception Junction Cover with Hotend Cable Strain Relief:: https://www.thingiverse.com/thing:4629839
Print Settings
Printer:
SainSmart Coreception-300
Rafts:
No
Supports:
Yes
Resolution:
0.2-0.25mm
Infill:
40-70%
Filament:
Any ABS, PLA+ or PETG
Any
Notes:
3D print with 20+ BRIM outlines
Category: 3D Printer Accessories