Prusa Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.31 – €0.38 net (excluding VAT)
For file: handle_v8_02mm_petg_mk3s_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 27.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an original design. This is for Prusa.This is easy to print.
- Rating
- 4.8 / 5
- Likes
- 140
- Downloads
- 521
- Makes
- 12
- Views
- 8,927
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an original design. This is for Prusa.
This is easy to print. This is for OctoPrint.
This is smart #3dp design and 100% printable. </b>
#3dp Update: 2nd Gen Mount is out!
Improved stability, fit and cable guide.
If you like what you are seeing, please consider following me.
prusaprinters.org/frankdeschner/
There will be more practical #3dp prints regularly.
Credit for the Fusion 360 model of Prusa MK3 goes to u/Swesen.
thingi Original Prusa i3 MK3
Proof of concept
Prusa MK3s with OctoLapse using the Prusa Camera Mount.
The recording was shot in complete darkness, with IR night vision.
2nd Gen Mount
– NEW: cable manager and better stability
– snaps to the spacers under the bed of the MK3
– choose your side: L/R
– GoPro mount requires M5 screw
Handle
– captive M5 nut
– pause your print at Z = 6 mm (30 layers à 0,2 mm)
Cam_front
– GoPro mount male
– bayonet lock housing
– iconic Prusa orange
Cam_back
– bayonet lock housing
– vent holes at top
– cable outlet in the bottom
Camera unit
IR Led Day Night Vision HD 720P UVC Camera Module
aliexpress camera module
Bolt
– M5 x 20 hex screw
– M5 hex nut
seriously, who needs a link for a screw?
Print instructions
Printer: Prusa MK3s
Resolution: 0,2 mm
Infill: 30 %
Supports:
– No: Mount, Handle
– Yes: Cam_front, Cam_back
Tip: Print the Mount with 3 walls, cubic infill for good stability.
Filament
inland PETG black Micro Center PETG
Prusa PETG orange Original Prusa Orange
Pause prints
PrusaSlicer: use the color changer, it's easy
cura: use the plugin "Pause at Height"
Dimensional accuracy tuning
Is your GoPro mount too tight? Try setting X/Y expansion to -0,1 mm,
to compensate the squishing of the outer walls.