Simple table cloth holder

We have a pretty thin garden table of only 12 mm thick.

I could not find a table cloth holder that would fit nicely around it.
So I quickly drew up a simple table cloth holder.
I etched my logo in to spice it up just a little.
If you don't like the logo, turn them around so the logo is under the table :)

By mistake a first made one which was 18mm thick, and was too loose for our table.
Then I scaled it down to 14 mm, which fits our table perfectly.
I added both of them, perhaps the 18mm fits someone else better.

Printing instructions
Printing is easy, no supports needed, I used a 2mm brim to prevent the model from coming loose from the bed.
I used 100% infill, since it is such a small model and you want it to be tough.

I recommend PETG for outdoor use and the bit of flexibility you need, so they don't break.

Let me know if you like the model or want something changed!