Clip on Diffuser for LED Strip Holder for 3030 Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clip on diffuser that fits the LED Strip Holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 880
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a clip on diffuser that fits the LED Strip Holder
Print Settings
Printer:
HyperCube Evolution
Rafts:
No
Supports:
Yes
Resolution:
.3
Infill:
20%
Filament:
3D Solutech PLA
Natural Clear
Notes:
This is printed on end with supports to the build plate, and a brim to anchor it.
It is 270mm in height.
Designed for .4 mm nozzle. The diffuser is .8 mm thick.
Post-Printing
When installing this diffuser the three center strap positions of the LED Strip Holder must be left open. Only the end two strap positions can be used to secure the LED strip and associated wiring. The diffuser engages with the three center positions to hold itself in place.
When I installed the diffusers my plan was to utilize double stick tape, but found that the clips held well enough.
Category: 3D Printer Accessories