Anycubic Kobra Z-Axis Dust Cover Grease Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgrade that shields the z-axis screw area preventing dust from getting in extending the life of the z-axis assembly.
- Rating
- 4.75 / 5
- Likes
- 61
- Downloads
- 398
- Makes
- 6
- Views
- 1,672
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple quick print that shields the area around the z-axis screw preventing dust and debris from getting into the grease lubricant. This will prolong the life of your z-axis assembly.
Uses the pre-existing cable holder hardware to secure itself.
Printed with no supports at 0.15mm layer height and slowly (around 30mm/s).
Some minor sanding may be required to the z-axis hole if your print results in poor tolerances.
During assembly make sure there is a very small gap around the whole of the z-axis screw to ensure the cover does not drag on the z-axis during printing. Pack the inside with grease when installing.
Printed on Anycubic Kobra using Anycubic Green PLA.