Stormbreaker Fridge Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wield the power of Thor and let Mjolnir know you've moved on with this Stormbreaker fridge magnet!
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 240
- Makes
- 2
- Views
- 1,456
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
General
I was looking for decent fridge magnets for Stormbreaker specifically that still had the Groot branch handle look but didn't really see much options. So I thought I'd take a crack at designing one that's fairly simple and easy to print.
This design takes 2 10x2.6mm magnets put back to back and should just slide in. You can glue all the pieces together but depending on your tolerances, you can just have press fit.
Printing
The hammer portion itself can be printed without supports and I print it magnet hole side down. The handle I printed standing up with a brim and zig zag supports to capture most of the detail but I think you can get away printing it parallel to the bed but you might have marks on the handle from the supports.
I printed this on TPU and PLA at 0.2mm layer height and 0.4mm nozzle