Cable Guide/Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable fully parametric cable guide. Print in place, many configurations!
- Rating
- 5 / 5
- Likes
- 79
- Downloads
- 369
- Makes
- 10
- Views
- 3,619
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Hubert's cable hanger design was great, but had extremely limited parametric capability. I wanted more flexibility and more designs, so I recreated it in FreeCAD with almost everything (maybe too much) adjustable via the Spreadsheet.
Heavily based on Hubert's design, if you output using the “Original” configuration and the 4 parts to match it, you will have one nearly identical. The only differences are I left off the fillets on the ends of the tabs and I left the holes round.
With 6 separate body pieces to mix and match, you can make a wide variety of configurations.
There are a bunch of notes embedded in the FreeCAD file, please be sure to review them before making any changes.
The gap at the clip is 0.33mm, same as the original - but if this doesn't suit your printer, you can just increase it to 0.5mm or more as needed - just watch the model and make sure you don't need to adjust anything else to match. Nearly EVERYTHING can be adjusted by parameter.