Heltec Meshtastic case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update 11/27/21 - Added a V2 body and buttons. Made the buttons separate from the body. Better for durability. Also…
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 234
- Makes
- 0
- Views
- 6,786
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Update 11/27/21 - Added a V2 body and buttons. Made the buttons separate from the body. Better for durability. Also leaves you with the option of discarding the reset button if needed.
I got these cheap Heltec boards to play around with meshtastic. Don't know what meshtastic is? Check it out at https://meshtastic.org/
I wanted to make these as compact as possible. I designed this case. It has just enough room for the board and a 1000mAh battery while not pinching the antenna. Also a spot for a switch. I ground the switch down on a grinder so its almost flush with the case to keep from turning it on/off by accident.
The switch I used can be found here. https://www.amazon.com/gp/product/B07Y88C1Q6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I also used m3x22mm bolts.
Print Settings
Printer:
hypercube
Notes:
I wanted these to be strong. They are printed with 3 walls and 4 top/bottom layers.
Category: Other