Sega Naomi Fan Adapter mk1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sega NAOMI arcade board Noctua 40mm fan adapter.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 83
- Makes
- 0
- Views
- 827
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a basic 40mm fan adapter for Sega NAOMI hardware. The stock fan often is extremely loud and worn out, by now. This will allow you to easily fit a 40mm (Noctua) fan after repinning the wiring to match that of the NAOMI.
You will need to file/cut 2 opposite corners off the Nocuta fan, in order to use the original fan mounting screws, to the heatsink. I was pretty aggressive, but you don't need to take off a lot.
The fan itself is friction-fit, but you may need to adjust based on the accuracy of your printer. For me it was just ever so small and held the fan securely. A little hot glue wouldn't hurt, along the edges.
YOU WILL NEED TO REPIN THE FAN CONNECTOR FOR THE NAOMI.
Recommend high temperature resistance material - I am using ASA.