Sega Naomi Fan Adapter mk1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sega NAOMI arcade board Noctua 40mm fan adapter.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a basic 40mm fan adapter for Sega NAOMI hardware. The stock fan often is extremely loud and worn out, by now. This will allow you to easily fit a 40mm (Noctua) fan after repinning the wiring to match that of the NAOMI.
You will need to file/cut 2 opposite corners off the Nocuta fan, in order to use the original fan mounting screws, to the heatsink. I was pretty aggressive, but you don't need to take off a lot.
The fan itself is friction-fit, but you may need to adjust based on the accuracy of your printer. For me it was just ever so small and held the fan securely. A little hot glue wouldn't hurt, along the edges.
YOU WILL NEED TO REPIN THE FAN CONNECTOR FOR THE NAOMI.
Recommend high temperature resistance material - I am using ASA.