Rokenbok Action Sorter Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the Rokenbok Action Sorter chute piece that comes off the side of the sorter and has two…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
This is a replacement for the Rokenbok Action Sorter chute piece that comes off the side of the sorter and has two chutes, one for Red Roks and one for Blue Roks. This isn't an exact replica of the original, the chutes do not have the bend at the end (seemed unnecessary and difficult to model) and some of the other supports are different, but this prints and works perfectly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
50%
Filament: Overture PLA Space Grey
Notes:
You could probably use 0.2 layer height for this, I chose 0.1 because it makes the chutes smoother, but it should be functional either way. Infill doesn't matter because generally the pieces are so thin that it's mostly walls anyway, so you can do 50%+ and it doesn't affect print time much. I used tree supports in Cura and they worked great.
Category: Construction Toys