Push Button Housing for Sheet Metal Edges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a housing for keeping push buttons handy on the edge of sheet metal housings and guards.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Push Button Housing for Sheet Metal Edges
This is a housing for keeping push buttons handy on the edge of sheet metal housings and guards. It has a 16mm through hole for stainless steel push buttons and the housing fits a 1.8mm thick sheet metal edge (dimension includes powder coating). It has a cable inlet and an outlet.
To install the pushbutton, put the push button nut inside the housing and screw the button in by turning it. Use pliers and a bit of loctite to secure the thread. Insert the cables, do the wiring/soldering and use some hot glue to attach the wires inside the back area of the housing. This way, there is a strain relief.
Housing can be printed from any filament, PETG or PC is recommended.