1 / 2
Black Magic Probe v2.3 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Black Magic Probe v2.3 ARM debugger.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 97
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Depending on the tolerances of your printer, the two halves should friction fit together. (You may need to scale the top half up or down slightly)
Optionally use two M2.5 heatset inserts and M2.5 x 8mm screws.
Features:
- hole for UART header
- hole for JTAG header