1 / 6
Caster Replacement Body
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for the caster / castor of a cheap plastic storage container
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What you need
Apart from the 3d printed parts you reuse some parts of the stock caster / castor wheel
Original Parts
- axle: ~ 30 x 5 mm
- 2 wheels: 35 x 7,5 mm
- pin: 6 mm diameter top, 7 mm diameter bottom
Printed Parts
- caster body
- 2 washers
Printing
Material: PLA, ABS, PETG - I used PLA and it seems to work great
Assembly
- push the pin into the caster body
- put the washers on the axle
- slide the wheels on the axle - one from each side
- click the axle-washer-wheels assembly into the body
Pin and axle need to click into place. You may use a hammer to insert the pin.