1 / 4
Voron 2.4 Magnetic Door Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple magnetic door handle for standard frame of Voron2.4.
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 129
- Makes
- 1
- Views
- 3,436
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnet Door Handle for Standard Voron 2.4 Frame with 3mm single door and 3mm sealing tape.
Installation requires drilling - works only with acrylic glass not plexi(C)-glass. Check yours!
What to print:
- 2x Door Latch
- 1x Door Handle
BOM:
- 2x M3x8 BHCS
- 2x M3x6 BHCS
- 2x M3 shim
- 4x 6x3 magnets (N52)
- 2x M3x5x4 heat-set insert
- 2 M3 t-nuts
- 2 M4 drill
Installation:
- Drop in M3 t-nuts where the handle should be
- Insert magnets in door latch (without glue) and screw tight with M3x8 BHCS.
- Insert heat-set insert into handle (small holes)
- Super glue the magnets into the handle (mind polarity) - don't worry the latch-magnets can be changed easily
- Align everything so the door is shut and everything is flush
- Mark the door-panel from inside where the heat-set insert are
- Gently drill both holes (check if your panel is suited for drilling!)
- Secure handle with M3x6 BHCS and M3 shim.