Mining Rig 120mm fan joiner bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to mount 6 - 120mm fans side by side on the front of the mining rig I built. I could not find any brackets…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 95
- Makes
- 0
- Views
- 1,037
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I needed to mount 6 - 120mm fans side by side on the front of the mining rig I built. I could not find any brackets that would hold the fans and then allow me to screw them to the face of the rig. I made these flush mount brackets. 1 set (top and bottom) will hold 2 fans together side by side. Photo coming with the brackets in use.
Note:
I would print them more than 50% infill. Reason for it is these were 20% and as you can see the screw heads crushed the surface a bit.
Also someone made a single: https://www.thingiverse.com/thing:2756758
Category: Electronics