Rat Rig V-Core 3 Frame Mount Electronics Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your electronics directly to 3030 aluminum extrusions without a panel.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 89
- Makes
- 0
- Views
- 1,323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These parts are for people building the Rat Rig V-Core 3 without an electronics panel. No supports or rafts required. All parts except the LM2596 bracket can be mounted to 3030 aluminum extrusions with M6 bolts and corresponding T nuts. LM2596 bracket use M5 bolts and T nuts. The LM2596, Octopus Pro and its fan mount require the use of M3 brass inserts with 4mm outer diameter.
Hardware BOM:
Large PSU - 3x M6x12mm bolts, 3x 3030 M6 T-nuts, 4x M4x5mm bolts
Small PSU - 2x M6x12mm bolts, 2x 3030 M6 T-nuts, 3x M3x8mm bolts
Raspberry Pi - 2x M6x12mm bolts, 2x 3030 M6 T-nuts, 4x stock RPi self-tapping screws
BTT Octopus/Octopus Pro - 3x M6x12mm bolts, 3x 3030 M6 T-nuts, 4x M3x6mm bolts, 4x M3 4mm threaded inserts
LM2596 Buck Converter - 1x M5x12mm bolt, 1x 3030 M5 T-nut, 2x M3x6mm bolts, 2x M3 4mm threaded inserts
RPi Fan - 2x M6x12mm bolts, 2x 3030 M6 T-nuts, 4x generic PC fan screws
Octopus Fan: 2x M6x12mm bolts, 2x 3030 M6 T-nuts, 2x M3x30mm bolts, 2x M3 4mm threaded inserts