Bistable Enclosure Lift Arm Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Arm for my Gas struts Mod
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 3
- Views
- 478
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After 3 weeks in the original RatRig config 1 of my struts ripped.
So i order new ones and print the Lid Mod from
ZEBaker98 ( V-Core 3 Bistable Enclosure Lift )
Than i saw that the mountings are get bending to hell because the Lid is way to heavy for the mini mountings they normally hold a door^^
But the Mod was really cool because of the wider opening of the lid and it hold perfect.
So i decided to make the good system even more good and much stronger so spend some time in Fusion and after some testing there is the final result.
Hardware you need:
- 4x M6x10mm cap hat screw
- 4x M6 Heat inserts
Print settings:
- 0.2mm Layer high
- 25% Infill (or more if you want to be extra safe)
- ABS, ASA, PC-CF or PA-CF (recommend PC or PA)
Notice: These mod works only with gas struts if the have an M6 Thread.
The original RatRig provided ones works you can take of the original heads.
-----------------------------------------------------------------------------------------------
→ For those who want support the time i spend you can buy me a coffee.
→ Looking for some great Filament / Print beds?
Check out Printbay and use code “printbayx10” to get 10% off*
(*works not for Outlet)
Socials:
→ Instagram: https://www.instagram.com/rawartistofficial
→ Instagram: https://www.instagram.com/rohdruck3d