MK3S/+ PSU Tool and nozzle holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.13 – €3.83 net (excluding VAT)
For file: Toolholder_0.2mm_PETG_MK3S_4h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.48 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 4.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Based on visle's design, it is placed on the top of the PSU and can hold 3 tools and nozzles
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The hexagons on the top are sized so that V6 nozzles can lightly screw into them. The 2 hangers on the back are spaced so that a 7mm wrench can be hanged from them, for changing nozzles.
Print with 3 perimeters so that the top layer is as nice as possible. Print in the default position, no supports or skirt/raft is required. Can be printed of PLA too, but because of the heat from the PSU I recommend PETG.