1 / 1
Adventure Force Jurassic Pro Trigger Slop Remover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple alternative to a dedicated quick trigger. Removes slop from the trigger on the Adventure Force Jurassic Pro.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
Currently at v1.0
Print at 0.28mm layer height (base is 0.84mm = 3 * 0.28mm)
Peg goes into slot on trigger behind the screw post (limiting the return travel and therefore the distance required to release the catch from starting position). Then put the screw back through the hole of the piece and into the screw post. Make sure to not tighten the screw too much or you will restrict movement of the trigger and may cause binding.