Flightcase Rack Cover Cable Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed some 3D printed hinges to implement a cable storage in the cover of my flightcase rack.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 15
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Open Community License v1
I designed some 3D printed hinges to implement a cable storage in the cover of my flightcase rack.
For the closing hinges I use these springs for some tentioning force. The distance between the rack front plate and the lid are 65 mm so there is enought space for any kind of cables and connectors as well as many direct input boxes.
The baseplates are mounted with M4 screws, the supports and latch bases were mounted to the baseplates with m3x20 mm sink head screws, as hinges I used M3x30 mm zylinder head screws.
The hinges use M3x15 mm sink head screws (for 6 mm plywood sheet).
The hinges are mounted with M6x30 mm zylinder head screws that are set under pressure with 20 x 9 mm springs inside the support.