Counting matching models…
Cable Organizer for USB and other IT/computer Cables. Designed with a focus to optimize and reduce filament demand to the max. Very lean version for rapid an easy print. Easy to print with PLA or other remaining filament which is…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Es una brida multihusos para sujetar plantas, cables o lo que se te ocurra y pueda con ello evidentemente.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Esta pieza evita que el cable del Hotend pivotee sobre el cuello de la ficha RJ y a la vez lo mantiene a un lado del gatillo del extrusor mejorando el uso y la duración del mismo ya que sirve de base para apoyar el dedo al accionarlo. No…
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
This is a small box to take up the Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi. (https://www.adafruit.com/product/3671). The bottom part can be fixed somewhere using a cable tie. I use it on my MK3S to connect camera cables…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes with holes for cables. You need two 8 x 4 magnets. It looks like this on the left side: It is designed to use with my magnetic cable duct (see…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
printing instructions print in TPU for best results print with PLA supports on print bed why this exists i desighned this cable because i tried inumirable cable tidying prints and not a single one solved the basic requirment of keeping…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
Gridfinity organizer for some larger and thicker cables like hdmi and power cords
Remix of Reolink RLC-520 junction box without hole on the side. All cables comes from the back side in this case.
C-Clip as a spare part. Used to attach brake lines and shift cables on bicycles. Unfortunately, they're so small that they often get lost when removed. Can be purchased as a spare part, but at a disproportionately high price. Made of…
Buddy asked me for some cable combs printed in a marble filament for his custom gaming pc build. Decided to make a library to pull from and share it with this great community. Includes sizes from 1x2 all the way to 12x2 in both closed and…
cable trunking (prints without supports) honestly the best i could make. edit easily even with tinkercad for beginners. just make the walls 1.5mm and base 1mm is enough. I printed on Bambu P1s in Petg as pla is not good for useful items…
En mi caso yo tuve que usar cinta de doble cara para pegar y dejar bien puesto los cables como se puede ver en la foto de todas formas también lo probé con velcro y funciona igual de bien. Si te ha gustado este modelo me justaría que me…
Cablerack for 3.5mm jack eurorack cables. Tape to desk edge with double sided tape. Designed in Freecad 1.0, file included. Photo is of slighly older version but very similar
Organizer for cables on testbench.
Print in PTEG or something a litle bit flexible.
I don't like that the wire can stick out at least somewhere, so I decided that I need to come up with these plugs for my Voron 2.4 (SIBOOR-Voron-2.4-AUG) for other versions it may not work, well, or you can mirror one of the details. To…
Soporte para cables escritorio (tablero 20mm)
I started building my own Slack Lack, but i used a Blink Mini as surveillance cam. It requires a permanent power suppliance via USB, so i had to guide it out of the enclosure. Since i have'nt designed anything yet, that fixed a real world…
Do you have a mess of cables behind your desk, do you not want to screw or glue cable clips to your desk, well then this parametric cable clip is perfect for you, dimensions can be changed in the parameters menu to make a clip just for…
Manage your cables with this solution : Use 38 mm version for 4x 8mm cable diameter max Use 55 mm version for 6x 8mm cable diameter max. Use 43 mm version for 3x12mm cable diameter max
Cable spooler mainly for UBS cables, but with scaling to cable anything is possible
This bracket mounts 4 5mm cables to the upper tube of a bicycle. Useful for Rohloff users that have 1 Brake and 2 shifting cables to be routed to the rear of the bike. Printed in ABS with 0.6mm nozzle and 0.35mm layers on the side,…
Needed a way to keep my small cables in the yard during Christmas time in the ground so they didn't swing around the lawn and keep it better hidden. No need for supports of any kind. Quick print. I printed in a bright colour to easily see…
Este modelo está diseñado para mantener tus cables perfectamente organizados ocupando el mínimo espacio posible. Además de su funcionalidad, destaca por su eficiencia: cada pinza consume solo 4 g de filamento , lo que permite imprimir…
Diese Schutzbügel ist für die Verlegung von Solarkabel über scharfe Kanten von Blech-Dächer gedacht. Damit wird verhindert, dass die Kabel durch die scharfen Kanten beschädigt werden. Es sind 2 Durchlässe für Kabelbinder vorhanden, damit…
I made this part 1mm higher and insert a cable hole. I made this because I want to use the magnet contacts with pre assembly cables. For me it was easier to mount
Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
Simple and easy to print clip to store your cables. Scale it up or down to fit your requirements.
# CableSaver ## Description This Thing has been desinged to save cable behind between a piece of furniture and the wall by keeping a minimum safety gap. This has been desigened for standard german cables like H05. This model is…
Scale to any size. Print 2 per cable, I suggest wrapping the cables in circles then clipping them. I have printed 100's and use them daily
Bastion mods: -btt octopus mount with and without mosfet mount -cables and ptfe (M6 coupler) relief -PSU cover with and without charger mount (for Rpi) -5 inch screen mount -Rpi3 mount -bastion logo diffuser for dragonburner I also…
This is a compact rack mount unit , specifically designed to fit into a 10-inch wide rack system . Its primary function is to help organize and secure cabling within a network or audio/video setup. He as 3x Ethernet hole and 1x big hole…
Over time I've accumulated a few different designs of clips and other fittings for attaching cables to things. They might be useful to someone else so I thought I'd share them here. There are two different styles of 'P' shaped clip with a…
What's this thing for? This part is designed to be installed in a hole in your drywall and to allow cables to pass invisibly from behind a TV, into the the wall, and back out into the back of your entertainment center where your receiver,…
Hello, I designed a small cable holder for the IKEA Gladom table. Still have some small ideas but looking forward to hear your thoughts. It does fit USB-A and USB-C cables as well as lightning. In case you want to remix it or use it in…
Robust cable organizer specifically designed for thick power cords ( approx. 8mm diameter ). Perfect for managing IEC C13 cables (PC power supplies, monitors, printers) that are too thick for standard USB cable holders.
[EN] 🦈 Shark 5-Slot Cable Comb A clean and simple solution to keep your charging cables from falling off your desk. Holds up to 5 standard USB/Lightning cables. ⚡ Function: Keeps cables organized and accessible. 🛠 Installation: Designed…
Cable Clamp - 100% printable - no support Versatile cable clamp: Fits tables 15-25mm. Sleek, strong, and easy to mount for a clean workspace. Create your own using the included STEP file. Dimensions: Length 40 mm Width 24 mm Hight 40 mm…
Print WITH suport on plate only. Imprimir con soporte solo en placa de impresión (árbol preferentemente)
As described by title. Use Amazon 60 x 10 x 2 mm magnet and strong glue to install them. To be used on a ferromagnetic surface.
Diese Schutzbügel ist für die Verlegung von Solarkabel über scharfe Kanten von Blech-Dächer gedacht. Damit wird verhindert, dass die Kabel durch die scharfen Kanten beschädigt werden. Es sind 2 Durchlässe für Kabelbinder vorhanden, damit…
Say goodbye to cable chaos with this Adhesive Cable Clip Organizer, Holds 5 Cables, Desk Edge Mount, Minimal Design Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Clean up your setup with this perfectly-fitted Audio Cable Wrap Organizer, Velcro Style Clips, Keeps Cables Tidy, Musician Gear Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ…
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Assemble and mount with m5 or m6 screws. Designed for 2 ethernet, 8 clear path cables and a power cable. (3 different sizes). Not sure what else would fit. Hopefully this can save some time for someone.
Some Clips for ordering, sadly not parametric, since this was only a bodge
This cable holder can stick easely to ur desk and carry 5 of ur cables!
A cable holder for 5 cables + a apple watch charging stand.
Organizer for various cables, chargers and earbuds case. Containing 5 slots for chargers and 10 for cables. General Dimensions: (all dimensions are in cm) 21x18x5.3 Dimension of the holes for USB cables: Bottom: 3.7x5x5.7 Middle:…
A holder for 2 Apple chargers and 3 cables. Printed in PLA with 15% infill. Printing with a layer height of 0.2mm.
Bike cable holders for 2,3 and 4 cables. holders are 5mm in diameter based on a tube diameter of roughly 35mm. I cant think of many reasons why you would need 4 cables, but if you do its there. The black clamp with the bolt in it is the…
PS1 Styled piece to fit on the end of the USB C - C cables included with PS5 slim Is tight enough to clamp with the cable but if you move your cables a lot I suggest using some adhesive between the parts.
DISCLAIMER: I am not to be held responsible for any damage or harm done using this model. Only perform electrical operations in case you know what you are doing. This is a simple model using only 3 grams of filaments (and no supports…
With these hangers you can sort and arrange your cables and/or Multimeter leads. Printed with my MK4 in PETG. I printed standing, with supports, which give the part more stability. Explore my other Printables:…
This is a simple model to allow cables to pass through any desk or table next to a wall. It can be resized to fit your needs. To cut a hole, trace the bottom of the main body on the desk, then use a jigsaw or multi tool to make the cut.…
A simple slide-on housing that holds a pair of 4-pin or 3-pin (male & female) fan connectors together, like those found on Noctua fan extension cables, but it should work with most fan extension cables that use the standard Molex KK style…
This bracket mounts 4 5mm cables to the upper tube of a bicycle. Useful for Rohloff users that have 1 Brake and 2 shifting cables to be routed to the rear of the bike. Printed in ABS with 0.6mm nozzle and 0.35mm layers on the side,…
Fully parametric wall conduit plugs. Two models; one cable and two cables. The plug is very useful when you want to route cables through wall conduits, but you do not want to make a permanent installation using, for example, silicone to…
[English] Universal power strip bracket (for wall or under-desk mounting). Secures with 4 screws, then tightens the power strip with two zip ties. Compatible with all power strips, regardless of size. [Francais] Support de multiprise…
I tried a cable clip (see remix linked) but that was too thin for my Moondrop Aria standard para-cord IEM headphone cable (8.4mm inside diameter, 6mm cable hole). I liked the original clip so decided I to quickly recreate my own variation…
Print flat on printbed without supports. Part can be comfortably made from PLA.
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Remix of loicloic 's excellent cable hanger, pretty much just halved it. If you like it, go to their profile page and give the original model a like. Reuploaded the hanger file, fixed mirroring issue. --- Print 2 of the Hooks, add a dab…
Upper cable lock cover for “ Table Clamp for Cables and Hook” by quantj Resize X and Y to 95% Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Filament: Any PLA Category: Tools
Remix of AvronW's wall-mounted headphone hook (40mm version only), adapted to clip onto common metal wire shelves. It clips securely to my shelves, which have 5.8~6mm diameter metal bars on the front. I don't know how consistent these…
These combs are designed to be zip-tied or hot-glued to wire shelf decking, I'm sure they will fit into other spaces as well. I'm hoping the flexure makes them work decently for cat5e as well. Design considerations/quirks The outer…
This is a cover that fills the hole for the power supply cables. It is useful for keeping heat and stink inside the Prusa Original Enclosure, especially for those who use the PSU Cable Quick Release addon. I designed this project in a…
Print with 0.2mm because of the thread. Inspired by the following model: https://www.printables.com/model/1258-cable-spool/ For 3 Cables: Print & Assemble: Bottom (3 Cables), Inter, TopA & TopB For 4 Cables: Print & Assemble: Bottom (4…
Tapa pasa cables de escritorio 35mm infill 100% wall 3 0.2 PLA
Tips are appreciated and go towards creating new designs Changelog: 2021-12-21: Added experimental male-male axis connector for use with an (experimental) separator for creating multi-spools 2022-05-07: Added a winding aid. Use an M6 bolt…
Here you have my take on the injection-molding idea. It is heavily inspired on this video , be sure to check it out. I recommend printing with TPU. Use as follows: Print both pieces. Put some vegetable oil with a light coating on both…
Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.
Da ich oft beim Kabellöten eine dritte Hand gebraucht hätte, habe ich diese Vorrichtung konstruiert und gedruckt.
Designed this piece after seeing the PS5 30th anniversary announcements. Fits on the USB A end of the cable included with Dualsense controllers. Printed up right for the best quality on the Sony logo. 0.2 Layer height, 0.4 layer width,…
Sticking a USB hanger hook to the wall next to your sofa or desk is a total game-changer - no more tangled mess all over the floor! But then you have this thing quite visible in your room, and I think it needs to be beautiful. So I made…
I added a bumped out rectangle to the back panel, leaving everything else about this one parts dimensions. I suggest printing as oriented with tree supports. I would attribute to @nadir's paid model but this is only a very small portion…
en mi caso lo use para una Artillery X1 pero creo que puede usarse en cualquier montaje en directa, ya que esta diseñado para estar detras de motor.
Could not find a sturdy / large enough, so I made a new one.
I have printed Paul Arden ‘s Apple Watch Dock in wood filament a while ago (see make ). Using the Woodgrain GCode post processor I altered the printing temperature for every layer. I liked this so much, I thought, I’d push it one step…
I wanted a simple clean way to run solar cables to the top of my GFC camper. So I created these simple clips that latch into the extruded frame channels to hold the cable in place. The ‘U’ shaped model is to clip into the extruded…
You can print it quickly. What I suggest is that you print them by two and tie your cables with two of theese as on the picture to hold the cables steadily. Printed this in .20mm with 15% infill. I printed 6 of them on the same run and it…
Redesigned the Upper Part to take a PrimeCables MagSafe Charger and a Fitbit Sense\Versa charger
I had to re-solder the wiring of the cable at the mac charger. To pretoect it in the future I made this TPU-sleeve. File can be printed twice and fixed with M2.5 or M3 screws. Printed with 95A TPU with 0.2 mm or 0.3 mm layer height.
Attache câble composé en 2 partie : une partie a visser (base). une partie a clipser sur la base pour maintenir les câbles. Réaliser en PLA avec 15% de remplissage.
It's a simple cable clip for 5mm ⌀ diameter cables. It prints in only 10 minutes! Printer: PRUSA MK3S+ Filament: PLA Supports: No Infill: 100 ø Print time: 10 min
