Modular Spray Can Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print modular spray can rack. No supports needed. The rack can be fitted to a wooden or MDF base using self…
- Rating
- 3 / 5
- Likes
- 57
- Downloads
- 147
- Makes
- 0
- Views
- 1,453
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Easy to print modular spray can rack. No supports needed. The rack can be fitted to a wooden or MDF base using self tapping screws and the sides and brackets can be fastened with M3x15 or M3x25* screws and nuts. The sides will need to be glued to the horizontal "gasket like" part but the parts feature dove tail cuttings to make this easier.
The tri-hexagonal pattern was obtained by using a top and bottom skin height of zero in Cura, along with a wall width of 4mm. You can use your preferred infill (I set it to 50% with a 0.8mm nozzle) to get your preferred pattern. I wish Cura had a honey comb infill pattern.
If you like the design, print it and find it useful, please share your make.
*you can tie two modules side by side using a single pair of screws.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.4 with 0.8mm Nozzle
Infill:
50%
Notes:
You can set the top and bottom skin heights to zero to reveal the infill pattern. Wall width was set to 4mm.
Category: DIY