Voron v0.1 one piece top hat with seperated hinges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the tophat by 93djen with inner hinges separately printable and space added for foam
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 189
- Makes
- 1
- Views
- 1,295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I loved the tophat design by 93djen but the inner hinges kept breaking and they were attached to the spacer which is quite a big print in one piece.
To overcome this, I made them separate pieces which can be printed laid flat so the stress is not on the layer lines to improve strength. I also added a small amount of material to make them slightly stronger.
The hinge pieces screw into the back of the spacer using some heat inserts. I recommend drilling them to size because I left the holes on the small size.
I also had problems with the original not closing flush, so I added 1.5mm extra clearance which seems to be just enough for some foam to sit between.