1 / 6
Drill guide for handles with 94mm C-C
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drill guide with press-in bushings for accurate handle mounting.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
You need two 4mm drill bushings with 7mm diameter to press into the 7mm holes, 5pcs of M3 heat-set threaded inserts, and 5pcs of M3x8 screws, and a 30mm wide steel rule.
The holes will end up at 49mm below the top of the drawer with a 16mm thick front, and you can adjust the distance to the left side freely.
I used this to mount custom handles on a bunch of IKEA drawers.