1 / 4
HC fanduct - turbo fan duct add-on for E3DV6 and BMG Bondtech — image 1
1 / 4

HC fanduct - turbo fan duct add-on for E3DV6 and BMG Bondtech

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

HoneyComb fanduct for TURBO Fan (40x40x20) like add-on for E3DV6 hotend (ideally combined with BMG BondTech direct…

Rating
0 / 5
Likes
3
Downloads
41
Makes
0
Views
399
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

HoneyComb fanduct for Turbo Fan (40x40x20) like add-on for E3DV6 hotend (ideally combined with BMG BondTech direct drive extruder).

  • I revised the model to a new version, Rev2_2024, the main changes are: 
    • More accurate dimensions 
    • It is lighter 
    • Slots for M3 nuts 
    • Groove for TurboFan cable 
    • Slightly modified design
  • The Fanduct is mounted directly on the original V6 hotends Fan.
  • This settup is efficient enough, normally when printing, the fan speed is sufficient at 55%... the bridges, overhang and short layers at 65%.
  • Prints well, no big angles, no supports.

Print settings: 🖨⚙

  • Material: PLA, PETG
  • Layer height: 0.25
  • Wall count width: 3 perimeters (nozzle 0.4), 2 perimeters (nozzle 0.6)
  • Infill: 30%
  • Support: NO

Assembly: Is needed: ⚠

For attachment all fanduct on E3DV6 hotend:

  • 4x wood screw (3.0x20mm), 2mm longer than the original.

For Turbo Fan attach:

  • 3x M3 L20mm Screws (for example: flat countersunk head, Phillips PH1).
  • 3x M3 Nuts.

---------------------------------------------------
PLA temperature resistence: I've been using it for a long time, for example prints Bed 70°C, nozzle 230°C with no PLA deformations (It is cooled from the inside by a Part cooling fan).

Modeled in the program: SketchUp
Printer brand: DIY

---------------------------------------------------
The photos below show the older version, but the basic shape is the same: 📷

Tags