Garmin Zumo 590/595 Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lost the base cover for my Zumo 595, hence i made a new one.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 188
- Makes
- 2
- Views
- 1,040
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The cover can be printed with any material (ABS recommended) with any layer hight from 0.3 to 0.1 mm
The seal has to be printed out of TPU or any other suitable FLEX filament.
Even though the seal is optional, concider that a well fitted seal keeps moisture and dirt away from the delicate connection pins. It will also work as a spring to press the cover against the latches.
Attention: The seal has to be assembled with its bulge side facing towards cover!
Attached the .f3d, so you may add a logo or text as you desire
Custom Section
Assembly:
Fit the Seal with the bulged side towards the cover!
Category: 3D Printing