Counting matching models…
Happy to present my TR-590 Mk X tricorder kit! Update 1/28/24 - Added versions of the Body with built-in support feet that you can break off with pliers afterwards. They firmly hold the corners and edges down to prevent curling up. You…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
simple leg to place the FRITZ!Box 7590 in an upright position. Print instructions You need to print two pieces. Update Added a version with legs approx. 14 mm longer for better clearance with thicker cables.
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
I remixed a Fritz!Box stand for the 7590. Made it higher so the connectors fit underneath. Also added a second version where the Fritz!Box is leaning a little bit backwards. Remixed from this:…
Wandhalterung mit Kabelzuführung von Unten und guter Belüftung der Fritzbox. Gedruckt mit 65% Infill in ABS. Stützen aktviert um die “Nasen” der Halterung sauber zu drucken.
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Rackmount für die FritzBox 7590 im 19 Zoll Serverschrank. Dabei können die Anschlüsse der FritzBox über bis zu sechs Keystone Adapter nach vorn herausgeführt werden. Folgendes wird zur Montage der beiden Teile benötigt: 8x…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
This is an stand for Fritzbox! 7590 (don't fit to 7590ax) it provides the folloging features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should…
This model is compatible with the lego system.
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
This is an ambidextrous wall mount for a Mossberg 500/590. It is ambidextrous, it can be mounted from either direction based on assembly. It includes the following mounts: Standard W/ Defender Tactical shell adapter 2x Ø4mm x 40mm screws…
This model is compatible with the lego system.
This model is compatible with the lego system.
Having bought this airsoft shotgun replica I found that it had no means of aiming as that it is a "breacher" model. Wanting a way of attaching a sight of any kind I designed this adapter that only needs 2 slightly larger M3x10mm screws…
Resized 1U Rackmount 19" for the FritzBox! 7590AX. Keystones on the right side
My router sits right above a cable gland and all the network stuff is on the other side of the wall. To hide the cable gland and the cables i designed this cover, which fits between the round things on the 7590 but doesn´t cover the…
English This is a specially designed mount for securely and space-efficiently installing the Fritz!Box 7590 AX (V1) in a 10" server rack. It is ideal for use in IT environments where organized and tidy storage of networking equipment is…
Orange Juicer 3D Model – 3 Sizes Available (420ml, 590ml, 740ml) Designed specifically for large oranges, this juicer comes in three sizes: 420ml, 590ml, and 740ml. Each size is perfect for extracting the maximum amount of juice…
The cover can be printed with any material (ABS recommended) with any layer hight from 0.3 to 0.1 mm The seal has to be printed out of TPU or any other suitable FLEX filament. Even though the seal is optional, concider that a well fitted…
A quick'n'dirty remix of a FritzBox Wallmount with flat backplate for double sided gluetape
Use a center punch to mark your drilling locations for a 1, 2, or 3 knob 1590b pedal.
My first attempt at using OpenSCAD for 3D design work. Took me an afternoon to tweak the code and get it all up and running. Some improvements in the code have yet to be made. The script itself is straightforward in its use; just change…
This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the wall by two screws. For the new Fritz!Box 7590 I didn't want to drill new holes, so I decided to make an adapter plate…
A quick stand I made to be able to set my router up vertically so it takes up less space and hide the cables. Added some decoration for fun. I also included a blank model without the cutouts to fit this specific model so you can remix it…
This model is compatible with the lego system.
This model is compatible with the lego system.
Heavily inspired by this design: https://www.printables.com/model/494301-gridfinity-wiha-7pc-precision-screwdriver-tray-for Matches my other design as well:…
EDIT 11/29/25: Updated the file so that it actually fits over the box as intended and adjusted the size of the holes to fit a standard auto punch! Template for using a punch to mark your pot, switch, and locations and top mounted power…
V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures). Printed with prusa mini and connection is pretty solid. I added a small slot at one end of the lid to pry it case you need…
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
I lost the magazine for my airsoft shotgun, and couldn't find anywhere to buy a replacement online, so I designed this. It uses an extremely simple gravity-feed design that requires you to turn the gun upside down to chamber a round…
Simple replacement for original. I have tested this in PETG. It might work better in TPU to help improve water-resistance. Also you may want to shorten it by 2mm or 3mm so it doesn't get accidentally bumped as easily. You must disassemble…
Aussparung für seitliche Anschlüsse hinzugefügt (USB / TAE) Die Druckdatei im 3mf Format ist mit BambuStudio Version 1.8.2.56 erstellt. Sie enthält “negative” Teile um die Aussparung zu ermöglichen. Ggf. das linke Teil einfach spiegeln um…
FritzBox 5590 Wall Mount Print recommendation: Infill 25% gyroid / no supports Material: PTEG Happy printing
The screws have to have a head diameter < 9 mm. The slot after the hole is for the routers anti-skid pads.
I made a more sturdier new Version 2 which can be found her: New Version 2: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach I'll leave the old version here since it uses very little filament:…
This model is compatible with the lego system.
The bracket must be printed twice. I would take PETG but it also works with PLA. 1.2mm+ wall thickness and min 20% infill. Support is not required.
1590A size drilling template with multiple locations for pots and jacks.
Set of knobs for 3590-like multi-turn potentiometers with 6.3mm shaft diameter 25mm, 20mm height, without shaft fix diameter 30mm, 20mm height, without shaft fix
Wall mount for Mossberg 590S models with a factory installed short shell bumper. Added hole at bottom of mount body to facilitate a way to attach a trigger guard. Trigger guard releases when 590S is pulled from mount. I went for large…
Hi! Are you also tired of putting Velcro under your favorite pedals because it damages the paint, leaves glue, or simply because you change them often? Then here's the solution! Racks in standard 1590A/B/BB and 125B formats, which you…
During the hot summer months, the Fritzbox tends to experience a decrease in performance due to overheating. To prevent this issue, I have designed a sleek stand equipped with a holder for a USB fan (40x40x10) for active cooling. Printed…
In der Scheune wird es im Sommer zu warm und die Fritzbox hängt sich auf, daher nun eine Variante mit Lüfter, welcher vom USB betrieben wird. Mit genug Platz für Luftzirkulation sinkt die Temperatur drastisch. Lüfter ist seitlich versetzt…
Milwaukee M12 Radio Model number 2590-20 (and 2951-20) holder, wall mount. No supports needed. Two holes 40mm spacing.
For assembly need two M3 screw and nuts
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
Part needed if you want to change your 2.5 hdd/ssd drive to NVME. Orginal screws from 2.5" drive are used to assembly new drive.
Makita 5903R Dust Collection Port This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw when the original dust port is missing or damaged. The design has been precisely crafted to provide a…
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
The Nikon Coolpix 4200, 5200, 5900, and 7900 cameras have a common failure where the tabs on the battery cover door break off. This prevents the door from being able to fully close. I've designed a 3D printed replacement for the door…
Jung A590 Rocker Switch (Wippschalter) Printer: Bambulab X1 Carbon Nozzle: 0.4 Filament: Bambulab ABS Layer Height: 0.16 Wall Loops: 2 Infill Density: 40% No support or brim needed Have fun
A jig for wiring up components to be put in a 1590B enclosure so you can wire the whole harness together in a nice open frame and just transfer to a drilled enclosure. This matches my 1590B Drilling template. Also great for testing…
Handy little open frame for wiring up your pedal and testing it before putting into an enclosure. Matches my drilling template layout.
Hi, another vertical shelf stand for 7590 Fritz!Box, made in 3 parts, just in case you have a lot of cabling i suggest to use also the front cover. Vertical stand since the hot season is arriving and this the device seems an heating…
Wandkonsolen für die Fritz!Box 7590 und 7590 AX mit Beschriftungen zum Einpassen Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports: No Infill: 20% Filament: Sunlu PLA+ weiss Category: Office
Replacement seal for a Garmin Zumo dustcap. It could fit other Garmin systems but i'm not sure about that. I printed it without supports or a brim. Printed with flex, Make it a fine print, because it's tiny. Print with the “ribbed” side up.
Printed in PETG with four walls for strength at 50% infill.
Printed out of ABS and it works fine. Uploading this, the mount lasted allready 2 ½ years with frequent use during all season. Although heat set inserts are needed for the M3 bolts, the M4 bolts, fixing the mount to the handle bar, can be…
Makita 5903R Dust Collection Port This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw using a shop vacuum, in combination with the DeWalt DWV900 dust extraction quick connect. It's the…
Cup&Cino Becherhalter Paper Cupholder 20oz - 590ml 12oz - 300ml 4oz - 120ml
For ease of printing I cut the file in half and manually added a block for supporting the thin overhang. I still used slicer supports as well. To assemble the two halves x5 3Mx25mm bolts. I used hetset inserts for bolts but normal m3…
I purchased a used HP ScanJet 5590 for a few bucks, but it was missing the automatic document feeder tray. Replacement trays are available for purchase, but I didn't want to spend more money on something I don't use very often - it was…
I found that my DeckBoss 590 cover was snagging on the lid stop brackets. Since the cover's are not cheap, I wanted to protect it from this snagging (and potentially ripping). In the warmer weather the cover really digs into the lid stop…
Drill guide for a 1590BB enclosure. Has drill holes for left and right expression sockets and center mounted DC power. Should support a 1590BB2 as well since I removed the top to protect any art you may have on the face of the enclosure.
Fits my SW 5906, printed in PC carbon fiber blend, has survived 20+ rounds of target ammo and 10 of +P. 1st one was printed on a Prusa Mini+ and I was surprised how well it printed the carbon fiber. Needs just a cleanup with a fine file…
Model with less plastic for faster printing. Nut to mount between the wooden slats if you've made this type of pedalboard. This way, you can move the pedals freely without having to drill holes in the pedal board. Remixed 1590A/B mounts…
This spacer creates voids in the Wagner 0529010 FLEXiO 590 600ml Spray Bottle. The tapered bottom focuses the paint directly at the suction opening, allowing you to work with small amounts of paint. printed without supports, using an…
I made this riser for my Midi Pedal. I needed additional volume to fit my ESP32 Micro Controller. So i printed this riser to give that volume required. Printed in PETG - But could be printed in PLA
Template for DIY guitar pedal assembly in 1590B enclosure. Designed to ensure correct potentiometer and switch placement and simplify soldering outside the enclosure. 3x3 grid of 8mm holes, dX = 18mm, dY = 12mm (see attachment).…
Holds the Wiha 26590 Precision Nut Driver Set. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931 )…
This is a clip to hold the trigger of a Ryobi P590 in the on position. Why would you do such a thing? Because you might have clamped your portaband to your workbench to use it like a vertical bandsaw, fed with both hands. Print Settings…
This is my case for my old DC 590 power supply. Until a few days ago, its case was an ice cream box, but now I decided to give it a better home, so I made this case. I hope you like it. Easy to print, you only need 4 self-tapping 3.5x10mm…
The tongue from the gas tank door lock Hyundai i40 815903z000
Scanned by Creality Otter. Printed by Petg at a 45 degree angle to the table.
Wiring jig for doing all the wiring in an open frame before transferring to a drilled enclosure.
Some people in r/diypedals asked that I share my mock-up enclosure, so here it is! It's modelled after the Tayda version of the 1590B, which has slight measurement variations from the specs listed by Hammond. This one has holes…
Als Lüfter verwende ich einen 140er Standard PWM-Gehäuselüfter von be quiet! Diesem habe ich einen USB-Stecker angelötet, der direkt von der FritzBox versorgt wird und somit mit 5Volt betrieben wird. Die Funktion von Lüftern die nicht…
I bought a used FritzBox 7590 to enhance my home network. The mount for my 5690 fiber was too big and needed some remodeling. The idea of the mount is to have the connections accessible from above. It is also possible to put it under a…
I bought myself a broken Bird One 590 to mod from ebay that was missing the top cover plate and had some other problems. After fruitlessly looking through the web for a replacement top, I took it for a challenge to design the plate for…
Battery cover for Gear2Play / 2Fast2Fun FPV 80590 remote controller. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.3mm Infill: 25% Filament: gembird PLA+ black Category: R/C Vehicles
Gridfinity - Milwaukee Compact Knife Sharpener 48-22-1590 - Holder
This shoe prevents your 1590EVS jigsaw base from scratching up your workpiece. You may want to hit the edges with some 220 grit to round them over slightly and soften the corners so they don't cause scratches. This is a work in progress…
A quick and dirty design. It fits OK and is attached with double sided tape.
Dust port nozzle for Bosch 1590 and 1591 evs Part# 655 Suction Nozzle BSH-2605730040 This has a 27mm outside diameter hose fit, which fits my rubber Festool hose. I've also included a 30mm file for bosch hoses. I would increase the infill…
This reinforced 3D-printed replacement for the IKEA KOMPLEMENT 21590 bracket is designed to improve durability and load-bearing performance compared to the original injection-molded part. Increased Wall Thickness - The original IKEA…
Replacementclip for holding the loops for Rittal 7159035 panels.
Mi bird One 590 has a broken light... so, i buyed a little led light for bike, a usb charger controller TP4056, a little 3.7v 500mah battery, a little button glued and thats it. The result is very nice light working perfect…
We went to use the paint sprayer only to find we didn't have the flow control slider. After a few measurements and comparisons to a photo we got this - only took 7 revisions! designed with Freecad and Tinkercad Category: Parts
![Bird One 590 Top Cover v2 [WIP]](https://media.printables.com/media/prints/43941/images/436607_b548fe2e-7ee4-4230-9c57-e7d6895fee38/large_display_bird_cover02_43941.png)
