Halo XLR 1500 range finder tripod mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your halo range finder to your tripod
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Adapter mount for the Halo XLR 1500 range finder
the hardware used are these:
https://www.amazon.com/gp/product/B07NCNMDJN/ref=ox_sc_act_image_1?smid=AJVD03PRD8VF4&th=1
https://www.amazon.com/gp/product/B08YYGRCBG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B08LQDLV51/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
You will have to heat up the M3 insert and push it into the print. With the ¼-20 insert, you will need to heat it up then slowly push/ thread it into place making sure you keep it as straight as possible.
I used a longer M3 screw to hold the insert while I heated it up and pressed it in.
I used a longer ¼-20 bolt for the same process for the ¼-20 insert. But I tightened some nuts against the insert so i could thread it into the print without burning myself.