Halo XLR 1500 range finder tripod mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your halo range finder to your tripod
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Adapter mount for the Halo XLR 1500 range finder
the hardware used are these:
https://www.amazon.com/gp/product/B07NCNMDJN/ref=ox_sc_act_image_1?smid=AJVD03PRD8VF4&th=1
https://www.amazon.com/gp/product/B08YYGRCBG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B08LQDLV51/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
You will have to heat up the M3 insert and push it into the print. With the ¼-20 insert, you will need to heat it up then slowly push/ thread it into place making sure you keep it as straight as possible.
I used a longer M3 screw to hold the insert while I heated it up and pressed it in.
I used a longer ¼-20 bolt for the same process for the ¼-20 insert. But I tightened some nuts against the insert so i could thread it into the print without burning myself.