Rat Rig V-Core 3 - Rear Cable Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable strain relief for Rat Rig V-Core 3 printers
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 122
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a cable strain relief mount for Rat Rig V-Core 3 printers (it could be used on any printer with a 3030 extrusion frame).
It's purpose is to assist with holding the wires that go to the EVA toolhead.
BOM
Printing Instructions
Print in any orientation that you believe uses the least support material. I printed the part standing upright (with tree supports) using filaments.ca Easy PC CPE, 0.8 cht nozzle, 0.5 layer height, 40% infill.
Assembly
First, put two M6 12mm bolts through the front 2 holes and attach the t-nuts. Place the third M6 t-nut in the 3030 extrusion. Place the part on the extrusion, lining up the front 2 bolts into the v-slot and the top hole with t-nut. Place in the third M6 12mm bolt.