1 / 2
Artillery Sidewinder X1/X2 Heatbreak Fan Spout — image 1
1 / 2

Artillery Sidewinder X1/X2 Heatbreak Fan Spout

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small spout to divert the heat break fan's exhaust air away from the model.

Rating
4.667 / 5
Likes
23
Downloads
112
Makes
3
Views
904
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution

This is a very simple small and lightweight spout to divert the heat break fan's exhaust air away from the model.

Please note the fan is reversed from stock, so it pulls air in through the cooling fins and expels the exhaust air out at the side. But because there is some turbulence some of the exhaust air was directed downwards which had negative effects on some of the more problematic prints.

Printed with thin walls option enabled as the spout part is only 0.4mm thick.

I recommend using PETG or some other more heat resistant materials and not PLA.

 

Tags