IKEA MULIG replacement shelf hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement shelf hook for IKEA MULIG clothes drying rack
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 88
- Makes
- 1
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement shelf hook for IKEA MULIG clothes drying rack.
Print with supports everywhere, lying on its side (see photos).
Make it solid by setting 100% infill, or increase perimeters enough to fill it.
0.10 - 0.15 layer height works best with a 0.4 nozzle.
PETG is recommended, but PLA also works.
These break from time to time because the original design is bad, hence the need for this model. At first, I only copied the original design instead of improving upon it. I have no added a simple reinforcement at the most usual point of failure. Let me know if you have ides for an even more robust redesign.
The original part is shown next to the printed part in the picture.