Counting matching models…
A replacement shelf hook for IKEA MULIG clothes drying rack . Print with supports everywhere, lying on its side (see photos). Make it solid by setting 100% infill, or increase perimeters enough to fill it. 0.10 - 0.15 layer height works…
A quick print that saves space on your drying rack.
I was in need of additional hooks for my IKEA Mulig drying rack. I didn't like any of the options out there and ended up making my own version that has a large hook section.
A stronger shelf hook for the IKEA Mulig clothes drying rack. The rack arrived with one hook broken so I modeled it and added some extra support to improve its strength. I also included the original version in the files. You can probably…
The original design was only for the side of the bar with 17mm OD and it will fit perfectly, I remixed it to fit also 13mm side. Print on side without support, I used PLA but PETG would have been a better choose
A simple attachment to enlarge the standard stoppers. So that nothing can fall off when browsing. Prints easy without support and 15% infill. Update 04.04.2025 V2 is now scalled in millimeters and not meters.
My vacuum robot gets stuck on the stand of the Ikea laundry rack. This printed addition prevents the robot from driving up the stand of the laundry rack and getting stuck there.
This is a Remix of the popular "Sock Clips for Drying Rack" by lundiplutzmus . It is modified to fit for the IKEA MULIG drying rack.
3D Model of Clothes Rack Stopper Compatible with - IKEA MULIG (Article Number 601.794.34) Hack for IKEA product to improve user experience Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model…
The IKEA MULIG drying rack has some sharp feet which can scratch the floor. So I made this protective feet for it. As a bonus the feet also act as anti-slip feet. Print them in TPU or other soft material. Dont forget to print 4 pieces.
Print this four times and attach them to your MULIG drying racks legs with super glue to prevent scatching your floor. I recommend printing with 100% infill to get maximum wear resistance Just to be sure ( in case Ikea has changed the…
I designed this wall mount so I can hang the IKEA MULIG rack on the wall and still use it for drying clothes without taking it down. When I do small laundry loads, I can hang things directly on it. I also made a right-angle hinge that…
Small hook for hanging clothes and other light items on the IKEA Mulig clothes rack. If you have trouble clipping the hook onto the rail, you might have to reduce infill % to allow for more flexibility.
Prints with no supports.
These printable hooks are designed to make your IKEA Mulig clothes rack even more useful. Snap them onto the clothing rack and to have a dedicated hook for coat-hangers. They come in two sizes, one for 5mm and one for 7mm width clothes…
A sturdy hook for the IKEA MULIG drying tower. I use this hook to hang a basket with clothes pegs. I would suggest printing this in PETG, as this is more flexible than PLA. I've printed it in PLA, and the hook partially snapped when…
Shelf for your EDC with sturdy hook for a backpack. I use it for my phone and wallet. I hang my backpack on the hook, even when its packed. Its not only neat, but it is actually easier to pack and unpack it, while hanging. If you don't…
Remix of the sock hanger for the Ikea Mulig drying rack to use less material
Introducing the innovative 3D model for a support stand designed specifically for Ikea's Mulig clothes drying rack. Are you tired of the wobbly legs and loose screws of your Mulig clothes drying rack? Look no further! We have the perfect…
Update 20/1/19: I have added a version without the hinge as mine broke after about a month or two, probably as it had to be printed in a certain orientation for the hinge, the non hinge version should be printed in the orientation shown.…
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
I did not include any way of locking it in place in the design, so to not have to modify the original bit itself, I decided to just drill a small hole in the bottom through the bin into this insert and threaded a M2.5 bolt in place. This…
This basic foot for the IKEA MULIG drying rack is designed to counteract the inherent instability of the rack's design. While the original rack may band and rock from side to side under the weight of clothes due to its structural…
Credit goes to Kurtle Design for the concept of the original aesthetic backpack hanger, and 8Complex for his clever remix. My need is to display handbags in my wife's dressing room on a dedicated IKEA MULIG clothes bar. So I redesigned…
Hook for IKEA Mulig Drying Rack 502.287.55
A part for installing wheels under IKEA Mulig shelf system, might also work with other Mulig series pieces. Works with M6 bolts and nuts, you'll need 4 sets of bolts & nuts for 1 printed part and 4 printed parts for a shelf. Print…
Print the feet in TPU. Print the clip in anything, like PLA.
Ikea Mulig drying rack lift anti-slide lock. I experienced this when I lifted the rack around. This lock keeps the rack locked when it is lifted, preventing the drying rack from sliding and wrinkling the clothes.
I have one IKEA MULIG Clothes bar that I’m not utilizing anymore, so I had this idea to convert it to a spool storage. Remixed too parts together and adjusted the necessary sizes for the snap in clip and used a $1 Wooden Broom Handle…
This allows you to mount your Hamulight L2046 power supply wherever you need it instead of having to rely on 3M tape. It will print fine without supports with “mounting ears” in the air because I used counterbore bridges and suitable…
Made this thing in Tinkercad after the third lince detached. The model has a small hole where the two parts connect, which you can see atleast when slicing in Bambu. It doesn't show in Tinkercad, so I decided to leave it as is, since it…
Zestaw łączników do połączenia 2 wieszkaów MULIG stojących obok siebie w celu poprawy stabilności (wyeliminuje to chwianie się wieszaków). W moim zastosowaniu użyłem 2 komplety do łączenia wieszaków . Łącznik pasuje do siebie po obrocie o…
Remove the legs and use the top part hanging from the wall/roof
Update: I found this to be very unstable and it eventually snapped, the mounting method wasn't good enough, should have bolted it on or something, I no longer use my Mulig so will not be updating this. Put a shelf atop your Ikea Mulig.…
I designed this little gadget to fix a rod of the IKEA MULIG drying rack that had come unsoldered from the frame. Printed in TPU, the result looks good; I’ve mounted it on the drying rack for several months now, and it seems to withstand…
I wanted to use the bars of an IKEA MULIG clothes rack as a hanging rod in a niche between two walls. The original bars are longer than the gap between the walls, so I cut them down to length with a saw. That leaves raw, open ends that no…
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
This allows you to mount your Hamulight L2046 power supply wherever you need it instead of having to rely on 3M tape. It will print fine without supports with “mounting ears” in the air because I used counterbore bridges and suitable…
Made this thing in Tinkercad after the third lince detached. The model has a small hole where the two parts connect, which you can see atleast when slicing in Bambu. It doesn't show in Tinkercad, so I decided to leave it as is, since it…
