myQ Chamberlain Smart Garage Door Opener - Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chamberlain wanted me to use double-stick foam to mount this to my garage door... I don't think so. Disappointed that…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 65
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Chamberlain wanted me to use double-stick foam to mount this to my garage door... I don't think so. Disappointed that no-one created one yet, so here you go.
I added a ridge around the top and bottom to secure with a tie wrap, should it break while adding/removing the sensor. Also added a 3-sided version, which mandates using a tie wrap. For easiest removal, your best bet is probably the 3-sided (tie) version.
Bolt hole distance (top to bottom) is 80 mm (3-5/32") and (left to right corner) is 53 mm (2-3/32").
Update 05/29/2021: Added version 2 with the top open and tie bands on the 3 remaining sides and thicker side supports. It only made sense to have the open side up, since the garage would be closed 99% of the time.
Links:
myQ Chamberlain Smart Garage Door Opener - Wireless Garage Hub and Sensor with Wifi & Bluetooth (Amazon)
Print Settings
Printer:
JGMaker Artist-D Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
50% or more
Filament:
TecBears PETG
Blue
Notes:
Print in PETG with 4 outer walls and at least 50% inflill.
Category: Electronics