aMAZEing dice - a cubed maze
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cube with 6 mazes, each connected to each other. You have two entrance/escape points.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 69
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Six mazes combined as a cube. The model is made from 6 panels, 2 entrance/escape panels, 2 angled connection point panels and 2 straight connection point panels.
Starting at the top with an entrance panel (1 or 6), you add an angled panel (2 or 5), then add two straight panels (3 and 4), followed by another angled panel ( 2 or 5) towards the bottom and finished with the last escape piece (1 or 6).
Parts get printed with the maze facing down to the build plate for clean edges. A color switch helps for a better contrast and making it a nice decorative piece as well. Make sure the paths are clean and remove any stringing.
Simply used CA glue to attach the parts together.
Designed for a 5mm steel ball bearing.
Update: Added a little stand to put it on display.