Case for LILYGO T5 4.7 inch e-paper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for LILYGO T5 4.7 inch e-paper esp32 board with flat battery. This is not compatible with touch-panel installed.
- Rating
- 4.5 / 5
- Likes
- 41
- Downloads
- 466
- Makes
- 3
- Views
- 5,234
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A case for LILYGO T5 4.7 inch e-paper esp32 board, has the space to add a 3,7 Li-Ion cell battery.
Print guide
Print how is placed in the file, add brim and fill (20/15%).
You can choose to add supports (i recommend) or not, but it will print the same because the hole are small.
In the bottom file model there is a space for the blue led, you can then drill if you want a hole and add a light guide to see the led.
I printed it with a matte black petg from 3dFils esFil.
Post print
Clean the slit with a fine blade between each square on the top switches and in the bottom space for usb-type C.
Battery
The battery i use is 8mm thick, is 500 mAh but you can use a bigger one.
In the next future…
A version with the touch panel support is scheduled.