1 / 1
Prusa Face Shield - RC3 (More reliable printing and no laser cutter required) — image 1

Prusa Face Shield - RC3 (More reliable printing and no laser cutter required)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Please read Prusa Research's original post "Prusa Protective Face Shield - RC3" for all best printing practices around…

Rating
0 / 5
Likes
0
Downloads
231
Makes
0
Views
1,892
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Please read Prusa Research's original post "Prusa Protective Face Shield - RC3" for all best printing practices around sanitation before printing!

Prusa Protective Face Shield - RC3 (Remixed for more reliable printing on not perfectly calibrated printers and jigs for fabrication using hand drills and kitchen shears instead of a laser cutter)

  • Outside geometry has been slightly changed to allow for faster printing speeds while keeping the correct radius of the face shield (~13% faster print times)
  • For San Francisco Bay Area have sourced a local plastic supplier:
    -https://www.tapplastics.com/about/locations/detail/san_francisco_ca
    -24" x 48" x 0.02" clear polycarbonate sheet
    -Modified design to use a 8" x 8" face shield for 0 waste fabrication
    -Can cut 8" squares using kitchen shears or strong scissors
    -Filet bottom two corners
    -Designed drill jigs to create holes using a hand drill instead of needing a laser cutter
    -Pilot hole with 5/64" bit, then drill actual hole with 1/4" bit for top and 3/16" bit for bottom
  • Option with holes or no holes (no holes uses slightly more material but will print slightly faster)
  • Uses original "bottom_reinforcement" file (which I have also uploaded on this page)
  • Printed with 0.4 mm nozzle, 0.25 mm layer height, 60 mm/s print speed, and 30% infill
  • As Prusa recommends, use PETG filament if possible

*Still a work in progress, designs may change

Tags