Voron Tiny-M 190 - Quickdraw Probe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take of mounting and using a Annex QD Probe on my Tiny-M 190
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 94
- Makes
- 0
- Views
- 1,607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here's my take on the quickdraw probe for my Tiny-M 190 - inspired by pRINTERnOODLEs AlienProbingProject (https://github.com/pRINTERnOODLE/Alien-Probing-Project-APP). Uses the Anex Engineering dock-short and probe body (https://github.com/Annex-Engineering/Quickdraw_Probe/tree/main/STLs), as I like those very much for the sleek and compact design. Dock is mounted in the front upper right corner of the printer, and the probe on the extruder fan.
For the assembly you will need four 6x3mm neodymium magnets, some wire, 8x M3x10 screws, two M3 T-nuts.
See it in the works here:
The probe and the dock does not require soldering or gluing - you just press fit the magnets against the wires.
Follow the Annex Engineering guide here:
My Klipper macros - fine tune the position of your dock, for your specific aplication:
[gcode_macro PRINT_START]
gcode:
G90
NOZZLE_CLEAN
G28 Z
LOAD_PROBE
BED_MESH_CALIBRATE ; autolevel
UNLOAD_PROBE
NOZZLE_CLEAN
G28 Z
INTRO_LINE
[gcode_macro INTRO_LINE]
gcode:
# purge line
G1 X60 Y5 Z0.6 F3000
G1 Z0.3 E2 F500.0
G1 X115.0 E12.0 F1000
G1 Z0.2 F1000.0
G92 E0.0
[gcode_macro LOAD_PROBE]
gcode:
G1 Z15 F3600
G1 X194.5 Y7 F3600
G1 X194.5 Y50 F3600
[gcode_macro UNLOAD_PROBE]
gcode:
G1 Z15 F3600
G1 X195 Y20 F7200
G1 X194.5 Y7 F3600
G1 X155 Y7 F7200