Counting matching models…
Background There are several 10" rack mounts for these TinyMiniMicro PC's, but none of them quite sat right with me. My goals for this were the following: Conform to the un-official 10" rack dimensions seen here (254mm x 44.45mm). PC Is…
This is of interest to you 🌟 Welcome to the community! Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
I have created this new model for the Valentine’s Day contest. It is a piece that I loved modeling, with many curves, simple but at the same time complex to make. If you like it and want more models like this, follow me on my Patreon and…
Challenge for me - daily figure modelling Community challenge - every 500 downloads and I'll raffle filament among followers
This is of interest to you 🌟 Welcome to the community! 🌟 Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
Meet the TinyMinion! This small troublemaker is a fresh 3D-model and is ready to cause some adorable chaos. With his versized goggles, tiny hands and feet, and that mischievous grin, this pocket-sized Minion is the perfect desk buddy or…
A small, easy-to-print, no-frills dosing capsule filler for the TinyMight. It may work for other capsules, I haven't tried. It is easily customizable online through OnShape, though! I printed the base with 0.32mm layers, you can go fast,…
Likes, Please! I’m excited to introduce the newest addition to our collection: the striking Red and Black Duckling ! 🦆 This captivating figurine is ready to grace your space with its bold colors. 🎨 Customization Opportunity : Feel free to…
0.16 layer height recommended. The tolerances are quite tight - hopefully they work for your printer. But if not, you can copy and modify this CAD project:…
A tray to aid filling of Tinymight 2 dosing capsules, sized for the official capsules. A flat area is included to lay the prepared herb, and then a number of holes for the empty capsules to be added. It might be worth printing out the…
Took me ~1.5 rolls of Prusament PETG Extras.. 2020 extrusions, M5 bolts (mostly 10mm), M5 sliding nuts, L-corner connectors, 90° brackets M3 threaded inserts and bolts M2.5 threaded inserts and screws M2 threaded inserts (for RaspberriPI)…
A simple, tiny box for either two regular modules or one Ethernet module and a regular module. Printed in Overture PETG on a Creality Ender 3 v2, 240°C, 20% infill, 60mm/s Needs 2x M3 screws and heat-set inserts.
Tray for the TM2, 4 extra stems, 6 dosing caps or rimmed baskets, and a little side dish that I put extra screens and stuff in. I had mine machined in aluminum by jlccnc, it was only ~$40, but tariffs were also ~$40 (thanks brain dead…
This plug should fit right into the opening of your Tinymight 2 vaporizer and protect it from dust, lint, dirt and moisture (to some degree). Print it in any material you like: PLA, PETG, TPU should all work. I printed it once in grey PLA…
A "docking station" charging stand for a Tinymight 2 dry herb vape. I really wish they'd include this or make it a standard accessory. (Note for the morally-superior that I shouldn't have to say: I use my vape for 100% legal prescribed MC…
I was soaking my XL Rocket Stem in some tupperware, but that's a waste of isopropanol. This handy container with cap will let you store your rocket stem and also soak it in a minimal amount of alcohol. Printing is super simple, no…
Uses 6 3x2mm Magnets. The tolerances are a bit on the looser side, so if you have a well calibrated machine, pure friction won't be sufficient - use a bit of glue to keep them in place. ATTENTION: This has only been tested with my…
This is a TinyML wearable designed with the Syntiant TinyML board running a Machine Learning model trained and deployed with Edge Impulse. The wearable vibrates when it hears vehicle sounds or their horns. Genius! The wearable can be…
This stand can house a TinyMight v2 and 4 attachments up to 8.5mm radius / 17mm diameter.
PRINT FAT SIDE FACING BED! snug fit. experiment by upscaling, try 0.5%
Vat drain stand for the Tinymaker! I remixed an existing one, found here . Needs some sch40 ¾" PVC for the support, and 2 M4/M5 bolts + heat set nuts. find the funnel holder and base at the original maker's page!
This was a project I set out to make it a bit safer to print at home using my TinyMaker resin printer. The design has a magnetic front door and top lid for easy access to the box. The sides of the box feature magnetic vent attachments to…
From the original model in MakerWorld: The Tinymaker resin printer wash & cure station requires you to manually hold the buttons down to activate them. In order to get around this, I have made this simple base that it sits into with 3…
Gridfinity holder for the TinyMight 2. It's a 2x1, 5 units tall. The pocket follows the shape of the TM2, has a notch for the button, and there's a hole next to it for a spare cooler insert. It took a few test prints to get the fit right.…
1x1 Gridfinity holder for TinyMight stems. Two versions: one that holds a single stem and one that holds four. The holes are 17 mm, which fits stems just over 16 mm with a little room. 7 units tall so the stems stand up straight. Printed…
Background There are several 10" rack mounts for these TinyMiniMicro PC's, but none of them quite sat right with me. My goals for this were the following: Conform to the un-official 10" rack dimensions seen here (254mm x 44.45mm). PC Is…
Small tray with funneling lid for filling the dosing capsules of the TM2. Prints well in PLA without supports on my MK4, but it might be a good idea to add supports to the overhang of the holes in the lid (excluding the grip). Without…
This is the model you need to print on your TinyMod to request your serial number https://www.tinymod.xyz/request-sn
