Rimfire Pistol Maintenance Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a stand to help install the Volquartsen Accurizing kit and aid with basic maintenance on my Ruger Mark 4 22/45.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 132
- Makes
- 0
- Views
- 1,470
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I designed and printed this after seeing that similar stands were $20 and still required a vise. I don't have a vise, so I took some measurements and made a stand that holds the gun up by the magwell. The tip of this sits on the mag release of my Mark 4 22/45.
This "should" fit any Ruger Mark 3 or 4 pistol, standard or 22/45, Browning Buckmarks and maybe the SW Victory. Let me know if this fits or doesn't fit something else and I will add/remove it from the list.
I will probably add a slip on cover that fits my other pistols in the near future.
Print Settings:
- Printed in Prusament PLA
- 215C
- 0.20mm
- Quality preset
- 4 perimeters
- 7 top and bottom layers
- 25% cubic infill.
Notes: Tolerances are 0.2-0.3mm so it's a somewhat snug fit. I would recommend printing each piece individually to reduce chances of edge lifting.
PRINT FLAT ON THEIR SIDES, I don't think I have the STL orientation correct for printing, so you will need to change that or use my 3mf.