Berkey Royal Water Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to raise the Berkey Royal Water Filter a little to increase clearance for filling from spout.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is designed to raise the Berkey Royal Water Filter a little and let it sit over the lip of our kitchen sink. This helps the spout to stick out over the sink a little more and be just high enough to make filling cups easier. It also gets the spout just high enough to avoid a lot of our dish washing splashes.
This is my very first 3D model design. I created this in Onshape and am also trying out Fusion 360 to see which program is easier for me to use.
I printed this at .28 layer height in PETG with 25% cubic infill. 15% or more infill should be enough but I wanted to make sure I could stand on it to prove to my wife it was strong enough to support a full Berkey without issue. I used PETG to handle the occasional hot water or coffee spills that could happen around it.