S⁴ (Strong Seed Sieve Stack lowtech)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.94 – €6.03 net (excluding VAT)
For file: [email protected]_2h18m_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.49 excluding VAT (range midpoint).
- Weight reported by the author
- 145 g
- Print time reported by the author
- 2.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
seed sieves from 10% to 90% stack-able to separate seeds by size/caliber in one go. Real lowtech and infill magic.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 587
- Makes
- 11
- Views
- 2,650
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
TL;DR
Strong garden sieves to separate seeds by size. The sieves can be stacked. Start with wider ones on top and tighter ones down the stack.
Collection
https://www.printables.com/social/277533-yahbluez/collections/421843
How to use?
Stack the sieves with the wider one on top and the tighter ones down wards to separate seeds by size. Each sieve will hold the seeds to big to go trough the mesh of this sieve.
Printers
The diameter is 180 mm, that's big enough and could still be printed on the prusa mini.
Size / Scaling
You can scale the sieves to any size you need. You could scale XY freely, scaling the Z axis may cause problems with the thickness of the bottom.
Filament
I used PETG but many other filaments will do the job too.
Magic
The mesh of the sieve is not made with CAD (freecad) but with the slicer. The whole sieve is a single rotated sketch.
sketch - the thickness of the sieve get lower with lower mesh sizes. From 9 mm at 10% down to 2 mm at 90%
rotated to create a solid
Solid body before slicing
Sliced without Bottom and Top layers and using the GRID infill pattern as mesh.
Motivation
My wife likes to get some.
Inspiration
I used this infill magic technik already with my infill cheat sheet:
https://www.printables.com/model/264159-infill-cheat-sheet
It is really cool how much you can do after CAD just with your slicer.
Notation / Naming / Numbers
SSS-90-10-045-060-PETG-240.3mf
That is 90 mm radius,
10% infill,
0.45mm layer height,
0.60 mm nozzle wide,
PETG,
240°C.
my own usage
I printed with an 0.6 mm nozzle, and printed the model from 10% up to 50% infill. If you print with lower extrusion wide you may go higher but the mesh wide with 50% was the smallest we need. I added all models up to 90% infill so do what you like to do.