1 / 14
70W Dimmable LED Worklight - Modifications and addition of parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really loved this project and that’s why I spent time on it. I made some minor changes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Author : Volan
Link : https://www.printables.com/model/10929-70w-dimmable-led-worklight-v14
Minor changes :
- I replaced the square nuts for fixing the bezel with hot inserts.
- I’ve reduced the housing for the square nuts so they can stand alone.
- I modified the USB module “QC 32V” attachment.
- I slightly modified and reinforced the part of the frame where the tripod adapter slips (Because I cracked 1 frame when inserting the adapter and another when tightening it)
- I modified the tripod adapter clamp.
- I modified the magnet holders to avoid sticking them.
- I modeled a bracket to fix the LTC3780 module and for the temperature sensing fan controller.
- I modeled spacers for fixing the fan.
Many thanks to Volan for his enormous work and sharing.