NF Sunrise Volcano 120mm Remote Cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative to an expensive CPAP cooling
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 92
- Makes
- 1
- Views
- 1,143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I bought a Mellow NF Sunrise thinking that it is the coolest extruder/hotend setup for my ender.
Got disappointed when I found out that nobody made a good part cooling for it. So I decided to create my own or in this case modify.
The fan duct was originally from VZBOT though I changed it to make it more compact and redirect the angle because the original one is too steep in my opinion.
Parts Needed:
1. 120x32mm Blower (Voltage according to your printer so that you can control it)
2. Cpap hose with an inner diameter of 21mm
3. Nuts and bolts. I am not sure what I have since it came with the hotend and spare from the printer. sorry.
ONLY PRINT IN ABS/ASA OR ANY HIGH TEMP MATERIAL TO AVOID WARPING.
(any suggestions will always be welcome)
ENJOY! have fun printing.